FP15 WATERLOO - WOOD FIREPLACE

Heating area : 1,000 - 2,800 Ft2
Maximum heat output : 95,000 BTU/h (27.8 kW)
Efficiency:
Door: Double
* Prices do not include taxes, freight, installation charges, duties, and customs fees if applicable.

 

Imagine a Gigantic High-Efficiency Fireplace

This fireplace is startling in size and is a logical and environmentally friendly option for any homeowner looking to combine style and high efficiency. With its ornamental façade, it will be the focal point of any room.

Large wood fireplace. Behind its large glass door, the 4.3 cubic foot combustion chamber can hold an impressive 60 lbs of wood.

Low emissions. This energy efficient fireplace complies with the EPA’s clean-air standards (only 1.6 g/hr of emissions).

High efficiency. The FP-15 fireplace is capable of heating large spaces and burns for 10 hours.

Specs / Manual

Appliance performance (1)

Fuel type : Dry cordwood
Recommended heating area (sq.ft.) : () 1,000 - 2,800
Firebox volume (cu. ft.) : 4.28
Maximum burn time : () 10 h
Maximum heat output (dry cordwood) : (2) 95,000 BTU/h (27.8 kW)
Overall heat output rate (min. to max.) : (2) (3) 16,610 BTU/h (4.9 kW) to 43,021 BTU/h (12.6 kW)
Average overall efficiency (EPA cribs / Douglas fir) : (3) N.A. (HHV) (4) N.A. (LHV) (5)
Average overall efficiency (dry cordwood) : (3) 63.9 % (HHV) (4) 68.4 % (LHV) (5)
Optimum efficiency : (6) (7) 69.7 %
Average particulate emissions rate : (8) 1.6 g/h
Average CO : (9) 157.4 g/h

(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(3) As measured per CSA B415.1-10 stack loss method.

(4) Higher Heating Value of the fuel.

(5) Lower Heating Value of the fuel.

(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

(7) Optimum overall efficiency at a specific burn rate (LHV).

(8) This appliance is officially tested and certified by an independent agency.

(9) Carbon monoxyde.

General features

Combustible top shelf to unit N.A.
Burn rate <1.5 kg/h (<3.3 lb/h)
Maximum log length 25"
Log positioning Over width
Chimney diameter 8"
Minimum chimney height (feet) 15'
Baffle type C-Cast
Approved for a mobile home installation No
Shipping Weight 545 lb (247 kg)
Door type Double, glass with cast iron frame
Glass type Ceramic glass
Glass surface – dimensions (Width X Height) 29 3/4" X 13"
Glass air-wash system Yes
Premium quality blower included (CFM) 176
Overall dimension (Height) 43 3/8"
Overall dimension (Width) 50 3/4"
Overall dimension (Depth) 31 5/8"
Door opening – dimension (Height) 12 3/4"
Door opening - dimension (Width) 33"
Firebox – dimension (Height) 17"
Firebox – dimension (Width) 25 3/8"
Firebox – dimension (Depth) 17 7/8"
Moulded refractory bricks Yes
Stainless-steel secondary-air system improving gas combustion Yes
Centre line of flue outlet to the side 25 3/8"
Centre line of flue outlet to the side 25 3/8"
Centre line of flue outlet to the back 11 7/8"
Centre line of flue outlet to the back 11 7/8"
USA standard (emissions) EPA / ASTM WK47329
Canadian Standard (emissions) CSA B415.1-10
USA standard (safety) UL 127
Canadian standard (safety) ULC-S610
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime

Approved chimney types

Manufacturiers* Brand Type Diameter
American Metal HSS AC Triple Wall 8" (15 cm)
American Metal HS AC Triple Wall 8" (15 cm)
M&G DuraVent DuraPlus HTC 2" Solid Pack 8" (15 cm)
M&G DuraVent DuraPlus AC Triple Wall 8" (15 cm)
Olympia Chimney Ventis 1" Solid Pack 8" (15 cm)
SBI Venting Division Nexvent 1" Solid Pack 8" (15 cm)
Security Chimney S-2100 + 2" Solid Pack 8" (15 cm)
Selkirk CF Sentinel (CF) 2" Solid Pack 8" (15 cm)
Selkirk Super Pro 2100 (ALT) 2" Solid Pack 8" (15 cm)
Selkirk Super Vent 2100 (JM) 2" Solid Pack 8" (15 cm)

* Specific components may be required depending on the chimney manufacturer.

Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
  Canada USA
Clearance – top (measured from the platform on which the appliance is installed)** 84" 84"
Clearance – combustible top shelf to unit N.A. N.A.

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.